Support #423

omf.nicta.node34's exp0 not connected

Added by Olivier Mehani over 1 year ago. Updated 11 months ago.

Status:Closed Start date:16/09/2010
Priority:Normal Due date:
Assignee:Rodney Berriman % Done:

100%
Category:Testbed maintenance
Target version:-

Description

Similar to #422 (I'm starting to suspect my images again...). Could someone check node34's exp0 ethernet cable? It doesn't appear to be connected.

2: exp0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
    link/ether 00:00:00:00:a6:42 brd ff:ff:ff:ff:ff:ff
    inet 10.42.0.34/16 brd 10.42.255.255 scope global exp0

History

#1
Updated by Christoph Dwertmann over 1 year ago

  • Status changed from New to Assigned
  • Assignee set to Christoph Dwertmann

Auto-negotiation issue, possibly a broken cable. Rodney's looking into it.

#2
Updated by Rodney Berriman over 1 year ago

Helpline entered for Aun to locate faults with reflectometer.
2 cables are faulty somewhere between the box and the switch.
F5-1-P21-22 which runs to the switch in L5 comms room, labelled "Tempo L5-1" port 12
F5-1-P21-23 which runs to the switch in L5 comms room, labelled "Tempo L5-1" port 20

#3
Updated by Rodney Berriman over 1 year ago

  • Assignee changed from Christoph Dwertmann to Rodney Berriman

#4
Updated by Rodney Berriman 11 months ago

  • Status changed from Assigned to Closed
  • % Done changed from 0 to 100

Repaired by Anthony.
All 3 cables tested OK.

Also available in: Atom PDF